Here’s An other addition to the workshop tools a Large Farriers Anvil
2 Comments
admin
November 18, 2016 8:23 pm
Picked this up outside eBay lol, It needs a good amount of TLC Needs top decking and horn dressing possibly hardy hole edges building up and a stand of course, Thinking the stand should put the top of Anvil about 29″ high as I’m just under 6′ !!.
As you can probably see it’s had a rough old life, I think it was used over a 100 years maybe more,
Done a little bit of cleaning starting to look good,
Filling some of the big corrosion holes with Mig as it hard and quicker then grinding the whole anvil,
Some Before and After shots! when I remember to take them LOL,
Before
After
Before
After
Before
After
Before
Before
The Base
admin
November 23, 2016 6:33 pm
Well forgot to take some pictures of the stand & Anvil in construction but this is all I have in some sort of order
Anvil paited looking good now with 10mm top milled of the top,
Stand Now Painted, It took some time to get the top of the Anvil level as the anvil is very miss-shaped
Completed Anvil with stand Castors and chain to stop the ringing and it works,
Picked this up outside eBay lol, It needs a good amount of TLC Needs top decking and horn dressing possibly hardy hole edges building up and a stand of course, Thinking the stand should put the top of Anvil about 29″ high as I’m just under 6′ !!.
As you can probably see it’s had a rough old life, I think it was used over a 100 years maybe more,
Filling some of the big corrosion holes with Mig as it hard and quicker then grinding the whole anvil,
Some Before and After shots! when I remember to take them LOL,
Before
After
Before
After
Before
After
Before
Before
The Base
I’m very Happy with the way this has turned out